Diamond core bit 5mm for tiles
![](https://builders.tools4.co.za/wp-content/uploads/sites/5/t4w-import/TC180805.jpg)
Diamond core bit 5mm for tiles
R59.00 Incl. VAT
50 available. Delivery 3-6 working days. Learn more.
![](https://widgets.payflex.co.za/assets/partpay_new.png)
![Close](https://widgets.payflex.co.za/assets/cancel-icon.png)
![](https://widgets.payflex.co.za/assets/Payflex_purple.png)
Shop Online
and fill your cart
Choose Payflex at checkout
Get approved and
pay 25% today
with your debit
or credit card
Pay the remainder
over 6-weeks.
No interest.
No fees.
Description
Application:
The diamond core bit is used to drill holes in:
- Ceramic tiles
- Marble
- Grade 5 porcelain (hardest)
- Granite
- Glass
- Slate
The diamond core cuts faster, smoother and lasts longer than any other core
drills.
How to use the diamond core bit:
The diamond core drill bit must be used with water at all times when
drilling. The water serves as a coolant to prevent the diamonds from
overheating. The maximum allowable temperature for a diamond core bit is 500°C.
There is no pilot drill with the diamond core bit. A low rpm rotary drill
with a planetary gearbox is required to be used with a diamond core bit. It is
possible to use a cordless drill, but in the lowest gear setting. No hammer
action is used.
- Tightly fasten the diamond core bit in the drill’s chuck.
- Keep the bit steady at a 45° angle
with the starting point on the edge of the assigned area to be
drilled whilst the bit is rotating. - A notch will be made (this is normal).
Gradually move the drill from 45° to 90° and continue drilling until
finished. - Allow the diamond core bit to cool down completely before proceeding to
drill another hole.
Water can be applied by:
- spraying water on the surface,
- using a wet sponge,
- attaching a water feed device. This is necessary when drilling into a
wall tile.
Please have a look at the video in the tabs above
showing how to use the diamond core bit.
An indication of the correct spindle speed:
DIAMOND CORE BIT DIAMETER | SPINDLE SPEED |
ø5.0mm | 800 rpm |
ø6.0mm | 600 rpm |
ø7.0mm | 500 rpm |
ø8.0mm | 500 rpm |
Ø10.0mm | 400 rpm |
More than Ø10.0mm (>10.0mm) | less than 400 rpm |
IMPORTANT:
The tool life will mostly depend on the proper usage and the hardness of the items
drilled into. It is normal for a diamond core bit to last up to 10 or more
drilled holes in hard tiles. Please remember to always use
water when drilling with diamond core bits.
Additional information
Supplier | Vermont Sales |
---|---|
Brand | Tork Craft |
You must be logged in to post a review.
Pre-Sale Questions
There are no questions yet.
Ask a question about “Diamond core bit 5mm for tiles”
You must be logged in to ask a question.
Reviews
There are no reviews yet.