Diamond core bit guide for size 4mm-35mm
Description
Application:
This is a drill guide designed to be used with diamond core bits.
Compatible sizes for the drill guide: Ø4-35mm.
The drill guide is held in position with two suction cups. It works very well
when drilling into tiles. The underside of the drill guide is covered with foam
to hold water when drilling on flat surfaces.
An indication of the correct spindle speed:
DIAMOND CORE BIT DIAMETER | SPINDLE SPEED |
Ø5.0mm | 800 rpm |
Ø6.0mm | 600 rpm |
Ø7.0mm | 500 rpm |
Ø8.0mm | 500 rpm |
Ø10.0mm | 400 rpm |
More than Ø10.0mm (>10.0mm) | less than 400 rpm |
IMPORTANT:
The tool life will mostly depend on the proper usage and the hardness of the items
drilled into. It is normal for a diamond core bit to last up to 10 or more
drilled holes in hard tiles. Please remember to always use
water when drilling with diamond core bits.
You must be logged in to post a review.
Pre-Sale Questions
There are no questions yet.
Ask a question about “Diamond core bit guide for size 4mm-35mm”
You must be logged in to ask a question.
Reviews
There are no reviews yet.