Promac Rubber Duck Rain Guard Grey 5L | WB847-1-5L
![](https://builders.tools4.co.za/wp-content/uploads/sites/5/2022/08/Rain-Guard-5.jpg)
Promac Rubber Duck Rain Guard Grey 5L | WB847-1-5L
Incl. VAT
Description
Promac Rubber Duck Rain Guard is an acrylic waterproofing system comprising of a combined saturator, sealer and topcoat used in conjunction with a membrane (reinforcing polyester fabric). Prevents water ingress into roofs, parapet capping, masonry walls and seals cracks / holes where leaks may occur. Promac Rubber Duck Rain Guard can be used to treat difficult areas where conventional waterproofing is required.
Lead content, less than 90 ppm
Excellent adhesion to suitably prepared surfaces
Forms a watertight system with the membrane
Low density system: Does not add excess weight to structures
May be overcoated with quality acrylic topcoats
Non-toxic
Tough and flexible
Water clean-up
Roofs, roof screws, flashings, joints, walls, parapets and capping: Apply Promac Rubber Duck Rain Guard thickly at a rate of approximately 2.5 litres per m². For effective waterproofing properties, it's recommended that Promac Rubber Duck Rain Guard be overcoated using a quality exterior coating. Use with waterproofing membrane.
Follow instructions for a trouble-free application and long-lasting durability:
Step 1 – Prime: Apply one coat of Promac Rubber Duck Rain Guard to areas of the prepared surface slightly wider than the membrane at a rate of 1.0 litre per m², subject to the surface profile.
Step 2 – Bedding: Thoroughly work the membrane firmly into the still wet Promac Rubber Duck Rain Guard to obtain maximum saturation from below, smooth out all air pockets and creases. Ensure a minimum of 50mm overlap on the adjoining lengths of the membrane.
Step 3 – Saturation: Immediately apply a coat of Promac Rubber Duck Rain Guard to complete the saturation of the membrane and overlaps at a rate of 1.0 litre per m².
Step 4 – When touch dry, apply a final top coat of Promac Rubber Duck Rain Guard at a rate of 0.5 litre per m². Protect from rain until dry.
Recommended:
Promac Pro Roof for your roof.
Promac Dimensions Silk for your walls.
Allow 4 hours drying time between coats.
You must be logged in to post a review.
Pre-Sale Questions
There are no questions yet.
Ask a question about “Promac Rubber Duck Rain Guard Grey 5L | WB847-1-5L”
You must be logged in to ask a question.
Reviews
There are no reviews yet.