Micro-Tec Lathe 400 X 3050 | BL3462220
Micro-Tec Lathe 400 X 3050 | BL3462220
Incl. VAT
Description
OPTIturn TH 6630D
Center and spindle lathe
Technical Specifications
| length | 4,650 mm |
| Width depth | 1,500 mm |
| height | 1,785 mm |
| mass | 3,730 kg |
| Power drive motor | 9 kW |
| Total connected value | 10 kW |
| Electrical voltage | 400V |
| Phase (s) | 3 Ph |
| Current Type | ~ |
| power frequency | 50 Hz |
| Spindle taper | Camlock DIN ISO 702-2 No. 8 |
| Spindle bore / rod diameter | |
| Center height | 330 mm |
| distance between centers | 3,050 mm |
| Circumferential diameter over machine bed | 660 mm |
| Circumference diameter in the bed bridge | 900 mm |
| Circumferential diameter over cross slide | 440 mm |
| Turning length in the bed bridge | 250 mm |
| bed width | 400 mm |
| Speed range | 25 – 1,600 min-1 |
| Number of speed ranges | 16 |
| Travel X-axis | 230 mm |
| Traverse Z-axis | 368 mm |
| Tailstock | MK 5 |
| Tailstock quill stroke | 235 mm |
| Coolant system Performance Coolant pump | 150W |
| spindle taper | MK 7 |
| Steel holder pick-up height max. | 32 mm |
| Feed area along | 0.044 – 1.48 mm / rev |
| Number of feeds along | 25 |
| Feed area flat | 0.022 – 0.74 mm / rev |
| Number of feeds plan | 25 |
| Gradient Metric | 0.45 – 120 mm / rev |
| Number of slopes Metric | 54 |
| Gradient inches | 80 – 7/16 Gg / in. |
| Number of slopes inches | 60 |
| Gradient Diametral Pitch | 7/8 – 160 |
| Number of Gradients Diametral Pitch | 42 |
| Gradient module thread | 0.25 – 60 |
| Number of gradients module thread | 46 |
| load | 1.4 t / m2 |
| Rapid | 3.8 m / minute; Max. 5 min (30 min break) |
description
- Leading and traction spindle lathes, which are characterized by high flexibility, precision and cost-effectiveness. With digital position indicator DPA 21 and quick-change steel holder
- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 8
- Closed, fast-speed feed gear, gears and shafts hardened and ground, running in precision bearings
- Clear selection lever for switching the feed rates
- Emergency stop blow switch, motor protection switch, lockable main switch
- Right / left rotation on bed carriage via switching spindle switchable
- Safety limit switch with positive opening contacts
- Central lubrication in the bed slide
- leading spindle
- LED machine light
- Emergency stop device with foot control
- With Siemens electrical system
- Quick change steel holder SWH 9-D
- 1 steel holder 41 x 180 type D for square chisels
Digital position indicator DPA 21
- Significant reduction in production times
- Higher work accuracy
- Error rate is reduced
- Clearly arranged keyboard
- glass scales
Room amenities:
main spindle
- Hardened and sanded
- Dry sump lubrication
- Mounted in 3 adjustable precision tapered roller bearings
- Gear wheels smooth, hardened and ground
power saving mode
- Machine shuts down automatically after a few minutes at idle
- Time adjustable
Electric engine brake
- Fast emergency stop
- In normal operation fast stop without caster
sled
- Precisely worked
- Upper slide 360 ° rotatable
- Waves and wheels running in oil bath
- Handwheels with adjustable fine scale 0.04 / 0.02 mm
- Quick change steel holder SWH9-D
- All guides can be adjusted by wedge strips
- Chip protection on the upper slide
energy chain
- gentle line and hose routing
rapid feed
- Push-button and selector lever for activating the rapid traverse for plan and longitudinal direction
- For even more efficient work
- Does not switch off the entire machine when retracting into the limit switch
tailstock
- For taper turning ± 13 mm adjustable
- Tailstock quill and handwheel with adjustable fine scaling
- Crank for position change
- Tailstock quill with two adjustable ratios 1/4 or 1/1 turn
Coolant tank
- Separate with level indicator and oil separator
- Easy and complete emptying and cleaning
Delivery Information
- Fixed bezel passage max. Ø 150 mm
- Running bezel passage max. Ø 130 mm
- machine light
- Reduction sleeve MK 5 / MK 7
- Fixed centering point MK 5
- Fixed center point MK 5, alloyed
- Quick change steel holder 9-D
- Steel holder 41 x 180 type D for square chisels
- Position stop with fine adjustment
- Change gear set
- Quality oil enclosed
- operating tool
Be the first to review “Micro-Tec Lathe 400 X 3050 | BL3462220”
You must be logged in to post a review.
Pre-Sale Questions
There are no questions yet.
Ask a question about “Micro-Tec Lathe 400 X 3050 | BL3462220”
You must be logged in to ask a question.
Reviews
There are no reviews yet.