Rotary burr to be used with pneumatic air tools and electric die grinders.
SHAPE: Arc round
CUTTING LENGTH: 20mm
METAL: Tungsten carbide
CUT: Double cut
A tungsten carbide burr can be used for:
- Cleaning welding seams
The speed at which you use your tungsten carbide
burr in your rotary tool will depend on the material you’re using it on and the
contour being drilled. It’s safe to say – do not need to exceed 35,000 rpm.
The benefits of tungsten carbide burrs:
Tungsten carbide burrs can be used on many materials:
- All metals
- Hard wood
- Reinforced plastics
Tungsten carbide burrs are much harder than HSS (High Speed Steel) burrs and are
used to cut harder materials. The burrs wear less and retain their hardness under
If the burrs are chipping, this could be due to the
speed being too slow. It is ideal to start the burr off slow, increasing the speed
as you go along. High speeds will prevent clogging in the flutes of your burrs.
When using burrs, always try to keep the burr on the move.
This will prevent the burr from jabbing and digging into your material causing roughness.
As with all drill bits and burrs, let the burr do
the work and apply little pressure otherwise the cutting edges of the flutes will
chip, reducing the life of the burr.